Zone Control; Srs Wow Control - Kenwood DDX8034BT Instruction Manual

Zone Control

You can set the front and rear audio source.
1 Display the Zone Control screen
> >
Touch [ ] [ ]
2 Set the Zone Control
[Single Zone] Turns off the dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
⁄
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
⁄
• There are following limitations when zone function is set
to "ON".
- There is no output from the subwoofer and the center
speaker.
- <Equalizer Control> (page 62), <SRS WOW Control>
(page 63), <Surround Control> (page 64), <Position>
(page 65), <DSP Bypass Control> (page 80), <Speaker
Setup> (page 80), <Car Type (DTA) Setup> (page 82),
and <Channel Level> (page 83) are not available.
[Zone Control]. (page 61)

SRS WOW Control

You can set up the SRS WOW effect.
1 Display the SRS WOW Control screen
> >
Touch [ ] [ ]
2 Set the SRS WOW Control
1 Sets a SRS WOW.
You can select any of the following sound
fields.
"OFF"/ "LOW"/ "MIDDLE"/ "HIGH"/ "USER"
SRS WOW User Setup
1 Display the Audio SRS Adjust screen
2 Adjust the Audio SRS
1 1 1
1 Selects a speaker to be set (Front, Rear or
Center speaker).
[TruBass] Sets the TruBass effect level.
[FOCUS] Sets the FOCUS effect level.
[SRS 3D] Sets the SRS 3D effect level.
⁄
• FOCUS: Adjusts the vertical position of the speaker and
sound image by virtual adjustment.
• TruBass: Assists the playback for the super bass sound.
• SRS 3D: Makes a natural 3D sound field.
• SRS WOW control is not available in tuner source, TV
source and HD Radio source.
[SRS WOW]. (page 61)
1 1 1
English 63