Zone Control; Srs Wow Control - Kenwood DDX8022BT Instruction Manual

Audio Control

Zone Control

You can set the front and rear audio source.
1 Display Zone Control
Touch
Control Menu" screen (page 88).
1 Displays the current source.
2 Returns to the "Audio Control Menu" screen.
2 Set the Zone Control
3
3 Turns the Zone Function (that sets different
source sounds for front and rear speakers)
On or Off.
4 Switches the front and rear audio sources.
(This button appears when the Zone
function is On.)
Use "Reverse" to change over the front and
rear audio sources.
5 Sets the front and rear audio source
separately.
(This button appears when the Zone
function is On.)
⁄
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is also
switched to the same source.
6 Adjusts the volume of the rear channel.
(This button appears when the Zone
function is On.)
7 Returns to the "Audio Control Menu" screen.
90 DNX8220BT/DDX8022BT
in the "Audio
1
2
4
5
5
6
7
⁄
• There are following limitations when zone function is set
to "On".
- There is no output from the subwoofer.
- <Audio Setup> (page 62) and <Equalizer Control>
(page 89) are not available.

SRS WOW Control

You can set up the SRS WOW effect.
1 Display the SRS WOW Control
Touch
Control Menu" screen (page 88).
1
1 Sets a SRS WOW.
You can select any of the following sound
fields.
• "OFF"
• "LOW"
• "MIDDLE"
• "HIGH"
• "USER"
2 Switches to the Audio SRS Adjust screen.
See <SRS WOW User Setup> (page 91).
3 Returns to the "Audio Control Menu" screen.
in the "Audio
1
2
3