Table of Contents
Advertisement
Sound Effects Menu
If the zone function is turned on, the
u:i.J / CiiiJ
button appears on each source control screen, with
which you can adjust the volume balance between
the front and rear sources.
~
~
W
Calls the Setup Menu. (see page 57)
W
Calls the Sound Effects Menu .
W
Turns the Zone Function (that sets different source
sounds for front and rear speakers) On or Off.
When turned On,
fIJI
and
fCa
are shown.
~
Sets the front and rear audio source sepal ately.
(This button appears when the Zone function is On.)
~ When the rear speaker sound is switched, the
~
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
However, if you have set the "Area" to "Reverse",
the audio source that is output at the AV OUTPUT
terminal is switched depending on the front sound
source.
III
Switches the front and rear audio sources.
(This button appears when the Zone function is On.)
Use "Reverse" to change over the front and rear
audio sources,
L!J
Returns to the Control screen of the previous
source.
Zone Con
t
ro I
.t _ _
<
Zone Control screen (when the Zone function is On),
,<
<
Zone Control
."
. ,
<
You can set the front and rear audio source.
Displayin9t~e Zon~
Col1tr91
screen',
82 English
Advertisement
Table of Contents
