Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4.
Page 4
Parking sensor wire (Light Green) Connect to vehicle's reverse lamp harness when Connect to the terminal that is grounded when either To connect the Kenwood navigation system, consult your navigation manual. Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.
Page 5
FUSE ( 15A ) REVERSE REMO.CONT MUTE ANT. CONT P CONT EXT.CONT Bluetooth Microphone (Accessory 9) (see page 10) Cooling fan GPS Antenna (Accessory 7) (DNX8220BT only) (see page 10) Accessory 1 English...
Gray Gray/Black White White/Black Green Green/Black DNX8220BT/DDX8022BT 2WARNING Functions Connecting the ISO Connector The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit.
TV Tuner (Optional Accessory) UNIT MONITOR Connection cable (Included in the TV tuner) DNX8220BT/DDX8022BT USB terminal (iPod) USB terminal Navigation System (Optional Accessory) INPUT ANTENNA Navigation System Input (DDX8022BT only) Connection cable (Included in the Navigation System)
Installation for Monitor/Player Unit Screw (M4X8) (commercially available) Self-tapping screw (commercially available) Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installing the Escutcheon 1. Attach accessory 6 to the unit. Firewall or metal support Metal mounting strap (commercially available)
Signals from the GPS satellite may be interfered with by these types of communication. • Painting the GPS antenna with (metallic) paint may cause a drop in performance. DNX8220BT/DDX8022BT Installing the Microphone Unit 1. Check the installation position of the microphone (accessory 9).
Removing Monitor/Player Unit Removing the Hard Rubber Frame (escutcheon) 1. Engage the catch pins on the removal tool 5 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Accessory 5 ⁄...