Equalizer Control; Graphic Equalizer Setup; 2 Dnx9140/Ddx814/Ddx8034Bt - Kenwood DDX8034BT Instruction Manual

Audio Control

Equalizer Control

You can set up the equalizer.
1 Display the Equalizer screen
>
Touch [ ] [
2 Set each item
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"/ "Rock"/ "Pops"/ "Easy"/ "Top40"/
"Jazz"/ "Game"/ "iPod"/ "User"
⁄
• "User":
Your own Graphic equalizer curve can be created.
See <Graphic Equalizer Setup> (page 62).
• When "iPod" is selected, the [EQ] button is
deactivated. "iPod" uses its equalizer function.
[EQ] Displays the Graphic Equalizer setup
screen. (page 62)
62 DNX9140/DDX814/DDX8034BT
>
] [Equalizer]. (page 61)

Graphic Equalizer Setup

You can Manually set the equalizer curve.
1 Display the Equalizer screen
> >
Touch [ ] [ ]
2 Display the Graphic Equalizer screen
⁄
• When "iPod" is selected in <Equalizer Control>, the
[EQ] button is deactivated. "iPod" uses its equalizer
function.
3 Select the channel to be adjusted
[F] Front speaker
[R] Rear speaker
[C] Center speaker
4 Set the Graphic Equalizer
1 1 1
1 Gain level can be adjusted by touching the
each frequency bar.
[2], [3] Sets a frequency.
[5], [∞] Sets a gain level.
[EQ Init] Returns to the previous level which
the gain level is adjusted.
[Flat] Tone curve becomes flat.
[SW LEVEL] Adjusts the subwoofer volume.
[Equalizer]. (page 61)