How To Set A Medium / A Device - Kenwood DDX8034BT Instruction Manual

How to Set a Medium / a Device

7 Disc media
Press the [0] button to open/close the front
panel.
If a disc is already inserted, it is ejected by
pressing the [0] button.
7 iPod
To disconnect the iPod, stop the playback
by touching the [38] button on the source
control screen, and then disconnect the iPod.
See <Source Control Screen> (page 28).
7 USB device
To disconnect the USB device, touch the [0]
button on the source control screen, and
then disconnect the USB device. See <Source
Control Screen> (page 22).
0
7 SD card (DNX9140 only)
This SD card slot is used to upgrade the
Navigation System.
For how to upgrade the Navigation System,
refer to the instruction manual of the
navigation system.
Press the [0] button for more than 1 second
to open the front panel.
Inserting the SD card
Hold the SD card with the label side up
and the notched section on the right, and
insert it into the slot until it clicks.
Removing the SD card
Push the SD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with
your fingers.
Press the [0] button to close the front panel.
⁄
• The playback starts automatically after setting the media
or the device.
Getting Started
English 13