Dsp Bypass Control; Speaker Setup; [Audio Setup]; Touch - Kenwood DDX8034BT Instruction Manual

Setup Menu

DSP Bypass Control

Temporarily bypassing DSP (Digital Signal
Processor) System.
1 Display the Audio SETUP screen
>

Touch [

] [
66)
2 Set the DSP Select
[Bypass] There is no effect by DSP.
[Through] There is an effect by DSP.
⁄
• When the mode is set to [Bypass], DSP System cannot
be adjusted.
80 DNX9140/DDX814/DDX8034BT
>
] [Audio SETUP]. (page

Speaker Setup

You can select a speaker type and its size to get
the best sound effects.
1 Display the Speaker Select screen
>
Touch [ ] [
[Speaker Select]. (page 66)
2 Select a speaker you wish to adjust
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
1 1 1
2 2 2
3 3 3
4 4 4
Center speaker
1
Front speaker
2
Rear speaker
3
4 Subwoofer
[Tweeter] You can set the tweeter when you
are selecting front speakers.
If you are using a tweeter together with the
front speakers, set the tweeter to "ON". In the
"ON" position, the Equalizer is adjusted to its
best position.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
> >
]

[Audio SETUP]