Surround Control - Kenwood DDX8034BT Instruction Manual

Audio Control

Surround Control

You can set up the sound field.
1 Display the Surround Control screen
>
Touch [ ] [
61)
2 Set the Surround Control
1 Sets a sound field.
You can select any of the following sound
fields.
"Bypass"/ "Bypass+Center"/ "Dolby PLII Movie"/
"Dolby PLII Music"/ "Dolby PLII Matrix"
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, SDDS, AAC or MP3/WMA), input
channels (front or rear channels), and sampling
frequency are displayed.
⁄
• When you have selected the TV or TUNER source and
when you set the Dolby PL, we recommend you to select
the "Dolby PLII Matrix" mode. If you select another Dolby
PLII mode, the sound is NOT output from rear speakers
when you receive monaural broadcasting sounds.
• Surround control can be set for each source.
64 DNX9140/DDX814/DDX8034BT
>
] [Surround Control]. (page
1 1 1
Dolby Pro Logic II Music Adjustment
1 Display the Dolby Pro Logic II Music Adjust
screen
2 Adjust the sound field
[Dimension Control] Sets the surround
position by adjusting the front and rear
volume balance.
[Center Width Control] Sets the vocal image
position by adjusting the right and left vocal
volume level.
[Panorama Mode] Turns the Panorama mode
On or Off.
⁄
• You cannot use the <Dolby Pro Logic II Music
Adjustment> during playback of a Multi-channel source.