Phone Number Preset - Kenwood DDX8034BT Instruction Manual

Hands Free Unit Control
5 Say the phone category to register (1st try)
Say within 2 seconds after the Beep.
6 Say the phone category to register (2nd try)
Say within 2 seconds after the Beep.
7 End voice registration
⁄
• A message is displayed if the voice is not recognized.
Read the message for the further operation.
• Repeat from 1st try if the voice is different from the 1st
try.
58 DNX9140/DDX814/DDX8034BT

Phone Number Preset

Registers frequently used phone number to
Hands Free control screen preset button.
1 Display the Hands-Free Control screen
See <Making a call> (page 52).
2 Select the Preset number to register
1 sec.
⁄
• If no Preset number is registered, pressing this button
momentarily moves to the step 3.
3 Select the search destination of the number
to register
[ ] Registers from Phonebook.
[ ] Registers from outgoing calls list.
[ ] Registers from incoming calls list.
[ ] Registers from missed calls list.
[Direct Number] Registers by entering phone
numbers.
[Voice] (DDX814/ DDX8034BT only)
Registers voice for voice recognition to preset
number.
[Memory] Registers the currently displayed
phone number.
[Delete] Deletes the currently displayed phone
number. Touch to display the confirmation
screen. Touch [Yes] to delete or [No] to cancel.
4 Search phone number to register with each
function