Devilbiss Ifill Personal Oxygen Station; Ifill Oxygen Cylinder/Regulator; Ifill Oxygen Cylinder Typical Fill Times - DeVilbiss 535D iFill Instruction Manual

535 personal oxygen station
Hide thumbs Also See for 535D DeVilbiss iFill:
Table of Contents

Advertisement

Available languages

Available languages

E N G L I S H
S P E C I F I C AT I O N S
SPECIFICATIONS

DEVILBISS IFILL PERSONAL OXYGEN STATION

Operating Temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41º to 95ºF (5º to 35ºC)
Operating Humidity Range: . . . . . . . . . . . . . . . . . . . . . . .15 to 95% R.H. non-condensing
Operating Altitude: . . . . . . . . . . . . . . . . . . . . . . . . . . .0 to 6,562 Feet (0 to 2,000 Meters)
Storage Temperature Range: . . . . . . . . . . . . . . . . . . .-40ºF to +158ºF (-40ºC to +70ºC)
Storage Humidity Range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 to 95% non-condensing
Electrical Rating: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115V~ 60Hz 4.1 Amps
Operating Voltage Range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 – 127V~ 60HZ
Power Range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .400 Watts Average
Oxygen Purity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93% O2 ± 3%
Dimensions: (including casters) w/o cylinder . . . . . . . . . . . . .12.25"W x 28.5"H x 22.5"D
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 lbs
Shipping Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 lbs
This unit is classified as nonprotected (ordinary equipment) per EN60601-1 . . . . . .IPX0
Specifications subject to change without notice.

IFILL OXYGEN CYLINDER TYPICAL FILL TIMES

NOTE– All filling times are approximate and may vary depending on altitude and environmental conditions.
Typical cylinder fill time from empty to 2,000 +/- 200 psig are as follows:
M4 . . . . . . . . . . . 60 Minutes
M6 . . . . . . . . . . . 75 Minutes
ML6 . . . . . . . . . .90 Minutes
C . . . . . . . . . . .130 Minutes
D . . . . . . . . . . .215 Minutes
E
. . . . . . . . . . .350 Minutes
NOTE- Degradation of performance may occur if unit is operated outside of specified operating parameters.
A-535
11
11

Advertisement

Table of Contents
loading

Table of Contents