Configuration Server Protocol; Configuring The Configuration Server Protocol - Aastra 480i Administrator's Manual
Sip ip phone release 1.4.1
Hide thumbs
Also See for 480i:
- Administrator's manual (264 pages) ,
- User manual (95 pages) ,
- Release notes (60 pages)
Table of Contents
Advertisement
IP Phone Administrator Guide
Configuration Server Protocol
Configuration Server Protocol
You can download new versions of firmware and confguration files from the
configuration server to the IP phone using any of the following types of protocols:
TFTP, FTP, HTTP. The TFTP setting is the default download protocol. You can
configure the type of protocol that the IP phone uses by setting it in the
configuration files, the IP phone UI, or the Aastra Web UI.
Configuring the Configuration Server Protocol
Use the following procedure to configure the configuration server protocol.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Server Settings"
on
page A-10.
IP Phone UI
Step
Action
1
For 9112i/9133i:
I
Press
on the phone to enter the Options List.
For 480i/480i CT:
Press % on the phone to enter the Options List.
2
For 9112i/9133i:
Select Network Settings.
For 480i/480i CT:
Select Network.
4-10
DFW Phone 972-992-4600
Note: For DHCP to automatically populate the IP address or domain
name for the TFTP server, your DHCP server must support Option 66.
For more information, see this chapter, the section,
"DHCP"
on
"Configuration
41-001129-00 Rev 09, Release 1.4.1
page
4-4.
Advertisement
Table of Contents
Troubleshooting
