IP Phone Administrator Guide
Advanced Operational Features
Advanced Operational Features
This section provides the following information about advanced features of the IP
phones:
Feature
MAC Address/Line Number in REGISTER
Messages
SIP Message Sequence for Blind Transfer Allows you to enable or disable the phone to use the Blind
Update Caller ID During a Call
Boot Sequence Recovery Mode
Auto-Discovery Using mDNS
Single Call Restriction (480i CT only)
6-2
DFW Phone 972-992-4600
Description
Allows you to enable or disable the sending of the MAC
address and line number from the IP phone to the call
server, in a REGISTER message.
Transfer method available in software prior to release 1.4.
Allows you to enable or disable the updating of the Caller ID
information during a call.
Allows you to enable or disable Web recovery mode and set
the maximum boot count on the IP phone.
The IP phones automatically perform an auto-discovery of all
servers on a network using mDNS. When the IP phone
discovers a TFTP server, it is automatically configured by
that TFTP server.
Allows you to enable or disable a single call restriction
between the 480i CT base unit and a call server.
41-001129-00 Rev 09, Release 1.4.1