Aastra 480i Administrator's Manual page 373

Configuration Parameters
Operational, Basic, and Advanced Parameters
Parameter –
sip intercom prefix code
Prefix Code
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
sip intercom line
Line
(in Web UI)
Description
Format
Default Value
Range
Example
41-001129-00 Rev 09, Release 1.4.1
DFW Phone 972-992-4600
Aastra Web UI Basic Settings->Preferences->
Outgoing Intercom Settings
Configuration Files aastra.cfg, <mac>.cfg
The prefix to add to the phone number for server-side outgoing Intercom
calls. This parameter is required for all server-side Intercom calls.
Note: The example below shows *96 for the prefix code which is used for
Sylantro servers.
String
N/A
N/A
sip intercom prefix code: *96
Aastra Web UI Basic Settings->Preferences->
Outgoing Intercom Settings
Configuration Files aastra.cfg, <mac>.cfg
Specifies the line for which the IP phone uses the configuration from,
when making the Intercom call. The IP phone uses the first available line
for physically making the call but uses the configuration from the line you
set for this parameter.
Note: The "sip intercom type" parameter must be set with the Server-Side
option to enable the "sip intercom line" parameter.
Integer
1
Line 1 through 9
sip intercom line: 1
A-83