Configuring Network Settings13; Configuration Server Protocol - Aastra 480i Administrator's Manual

From the Aastra Web UI:
1 Click on Advanced
Settings->Network.
2 Enable the "DHCP" field by
checking the check box. (Dis-
able this field by unchecking the
box).
3 Click to save your
changes.
Configuring Network Settings
If you disable DHCP on your
phone, you need to configure the
network settings manually. Use the
following procedures to configure
the phone's network settings
manually.
From the IP Phone:
1 Press won the phone to
enter the Options List.
2 Select Network.
3 Select IP Address and enter the
IP address of the phone.
4 Select Subnet Mask and enter
the subnet mask.
5 Select Gateway and enter the
gateway address.
6 Select DNS and enter a Primary
and/or Secondary DNS server.
7 Press Done to save the changes.
The IP phone is manually
configured. You can now continue
the phone configuration if required
using the wbutton on the IP
phone.
From the Aastra Web UI:
1 Click on Advanced
Settings->Network.
2 Enter an IP address of the phone
in the IP Address field.
3 Enter a subnet mask in the Sub-
net Mask field.
4 Enter a gateway in the Gateway
field.
5 Enter a Primary DNS in the
Primary DNS field, and/or a
secondary DNS in the Second-
ary DNS field.
6 Click to save your
changes.
The IP phone is manually
configured. You can now continue
the phone configuration if required
using the Aastra Web UI.

Configuration Server Protocol

You can download new versions of
firmware and confguration files
from the configuration server to
the IP phone using any of the
following types of protocols: TFTP,
FTP, HTTP. The TFTP setting is the
default download protocol. You
can configure the type of protocol
that the IP phone uses by setting it
in the IP phone UI, the Aastra Web
UI, or the configuration files.
IP Phone SIP Admin Guide 13