Rear Vent Config. W Horizontal Term. (W Vertical Rise); Side Vent Configuration With Horizontal Termination (With Vertical Rise) - Travis Industries 864 See Through Installation Manual

24

Side Vent Configuration with Horizontal Termination (with vertical rise)

•
The termination must fall within the shaded area shown in the chart. Use the indicated restrictor and diffuser
positions.
•
Up to four elbows (45° or 90°) may be used.
•
Only one horizontal elbow may be used.
22' max (6.7m)
20 feet (6m)
15 feet (4.5m)
10 feet (3m)
5 feet (1.5m)
0 feet
This is considered a horizontal
elbow (it does not matter
whether it turns right or left).
It may be a 90° or 45° elbow.
© Travis Industries
Installation
(for qualified installers only)
Exhaust Restrictor # 4
Intake Restrictor # 2
Diffuser Position # 2 (stock)
Exhaust Restrictor # 4
Intake Restrictor # 1
Diffuser Position # 1
H1
4090507
Exhaust Restrictor # 2 (stock)
Intake Restrictor # 1 (stock)
Diffuser Position # 1
H2
Horizontal length is calculated by adding
both lengths of horizontal run
(Horizontal Length = H1 + H2).
This is considered a
vertical elbow
22' max (6.7m)
20 feet (6m)
15 feet (4.5m)
10 feet (3m)
5 feet (1.5m)
0 feet
100-01217_000