Rear Vent Configuration With Horizontal Termination (No Vertical Rise) - Travis Industries 564 SS GS2 Installation Manual

Rear Vent Configuration with Horizontal Termination (no vertical rise)


The termination must fall within the shaded area shown in the chart. Use the indicated restrictor and
diffuser positions.
Optional 45 Elbow
Vent with No 45 Elbow
3 feet
915mm
0 feet
Vent with 1 45 Elbow
3 feet
915mm
0 feet
© Travis Industries
Installation
See the charts below to
determine maximum vent
mm
mm
(for qualified installers only)
Termination
-Exhaust Restrictor:
Remove the exhaust restrictor
and replace the screws.
-Intake Restrictor # 1 (stock)
-Diffuser Position # 1 (stock)
-Min. 4" (102mm) Horizontal Section
-Max.48" (1.2m) Horizontal Section(s)
-Exhaust Restrictor:
Remove the exhaust restrictor
and replace the screws.
-Intake Restrictor # 1 (stock)
-Diffuser Position # 1 (stock)
-Min. 4" (102mm) Horizontal Section
-Max. 24" (610mm) Horizontal Section(s)
4141208
31
100-01397