Basic Setup; Mounting The Cameras - SVAT CV502-4Ch Quick Start Manual

BASIC SETUP

MOUNTING THE CAMERAS

1. Decide if the camera will be wall-mounted or sit on a desk/tabletop. The camera can be adjusted for either mounting scenario by rotating it to the
required position.
2. Screw the mounting bracket into the camera's mounting hole, turning it clockwise.
3. Mount the camera in the desired location no more than 60 ft from the DVR unless you have purchased additional wiring. You may mount the cameras on a
wall, ceiling or desk.
4. Ensure that the cameras are strongly secured into the wall.
5. Adjust cameras to the desired viewing angles.
6. For additional help on mounting the cameras, please see the drilling template, located at the back of the users manual.
Adjust camera to desired viewing angle
CV502-4CH
Ensure the camera is secured into place
For more information on camera mounting, please see Pg. 8 and 84 of the manual
SVAT ELECTRONICS
now you can see
2