Table of Contents
Advertisement
Remote Control Functions:
1. MENU button:
Please see menu setup section.
2. FREEZE button:
Press any channel to get full screen display, and then press FREEZE to freeze the picture.
Press FREEZE again to unfreeze.
3. ZOOM button:
Press ZOOM button to achieve zoom in display.
Press
Press Zoom button again to achieve zoom in display.
Press
4. AUTO button:
Press AUTO to get the sequential displays of channel 1, channel 2, channel 3, channel 4,
and Quad respectively and proceed in cycle. Make sure that each channel is in a state of
ON while setting auto sequence in the menu.
5. QUAD. button:
Press QUAD button while in full screen mode display to display pictures in quad.
6/7. PIP button:
Press PIP button to get PIP (picture in picture display). Channel 1 is the default for Full
screen, and Channel 2 is the default for Sub-screen.
8. Separate cameras button:
Press to view 2 cameras at same time
9. Camera 1 button:
Press to view full screen of camera 1
10. Camera 2 button:
Press to view full screen of camera 2
11. Camera 3 button:
Press to view full screen of camera 3
12. Camera 4 button:
Press to view full screen of camera 4
Menu Setup
Press MENU to setup the menu at any mode.
1. How to set the menu:
Press MENU to enter main menu.
Press
section and choose the desired section. Press OK
to enter the desired section. To exit, press MENU
button again.
buttons to choose zoom area.
buttons to get full area display or press ZOOM to re-choose zoom area
buttons to move the highlight
Advertisement
Table of Contents
