Qvis APOIR-PTZ23 User Manual page 38

Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu.

WHITE BALANCE SETUP: Move the cursor to current option and then click confirm button, you can go to
the third menu.

EXPOSURE SETTING: Move the cursor to current option and then click confirm button, you can go to the
third menu.

DAY/NIGHT: Set day/night mode. Move the cursor to current option and then click confirm button, you can
go to the third menu. There are three options: auto/manual/off. Please use the left/right button on the
keyboard or in the PTZ camera terminal menu to set. Please make sure your product supports this function.

FOCUS MODE: This is to set the camera focus mode, focus limit, etc. Please use the left/right button on the
keyboard or in the PTZ camera terminal menu to set.

ZOOM SPEED: The bigger the value, the faster the speed. Please use the left/right button on the keyboard
or in the PTZ camera terminal menu to set.

DIGITAL ZOOM: There are two options: on/off. Please use the left/right button on the keyboard or in the
PTZ camera terminal menu to set.

APERTURE: This is to adjust the lens to achieve clearer video footage. Please use the left/right button on
the keyboard or in the PTZ camera terminal menu to set.

APERTURE CTRL LEVEL: System can auto reduce the aperture to lower the video noise when it is in a
poorly illuminated environment. Please use the left/right button on the keyboard or in the PTZ camera
terminal menu to set.

NEXT PAGE: It includes the following options: picture flip, freeze function, camera factory default setup,
camera restart. Please use the left/right button on the keyboard or in the PTZ camera terminal menu to set.

BACK: Go back to previous menu.

EXIT: Log out system menu.
10.4.3.1 White Balance Setup
Move the cursor to WHITE BALANCE MODE and then click confirm button, you can then go to the submenu.

WHITE BALANCE MODE: Set white balance adjustment mode. There are several modes such as auto,
auto trace white balance, indoor, outdoor, and manual. Please use the left/right button on the keyboard or in
the PTZ camera terminal menu to set.

R GAIN: Before you set R GAIN option, please note it will not be in auto mode. Please use the left/right
button on the keyboard or in the camera's terminal menu to set.

B GAIN: Before you set B GAIN option, please note it will not be in auto mode. Please use the left/right
button on the keyboard or in the camera's terminal menu to set.

BACK: Go back to previous menu.

EXIT: Log out system menu.
© Copyright Qvis® All documentation rights reserved.
WB MODE ： AUTO
： 001
R GAIN
： 001
B GAIN
BACK
EXIT
30