4.1 Component Installation
Wall mount bracket and its components are shown below. See Figure 4-1.
4.2 Installation
4.2.1 Installation Requirements
The wall mount PTZ camera can be installed in the hard construction wall in either indoor or outdoor
environments. Before the installation, please make sure:
1. The wall is thick enough to install the expansion bolt.
2. The wall can at least sustain the 4x weight of the PTZ camera.
4.2.2 Installation Steps
Please draw four holes in to the wall according to the holes found at the base of the wall mount bracket. Then
you can drill four holes and insert the expansion bolts (not provided). Use four hex bolts and flat washer to fix the
bracket in the expansion bolts. See Figure 4-2.
© Copyright Qvis® All documentation rights reserved.
4 Wall Mount Bracket Installation
Installation
Hole
Figure 4-1
Figure 4-2
10