Page 1
QUICK ASSEMBLY GUIDE SPEAKERS USB PORT AND AUDIO IN JACK WATER BOTTLE HOLDER CONSOLE GRIP PULSE HANDRAILS SAFETY KEY PLACEMENT CONSOLE MAST IN-REACH CONTROLS MOTOR COVER ON/OFF SWITCH TRANSPORT WHEEL CIRCUIT BREAKER CAUTION ATTENTION PRECAUCIÓN KEEP HANDS AND FEET GARDER LES MAINS ET LES MANTENGA LAS MANOS Y LOS AWAY FROM THIS AREA.
PRE ASSEMBLY TOOLS INCLUDED: F 8 mm T-Wrench F 5 mm T-Wrench UNPACKING F 5 mm L-Wrench Place the treadmill carton on a level flat surface. It is recommended that you place a F Screwdriver protective covering on your floor. Take CAUTION when handling and transporting this unit.
Page 3
ASSEMBLY STEP 2 Open hardware for step 2. HARDWARE fOR STEP 2 : With the console upside down, attach the BOLT (D) FLAT WASHER (E) SPRING WASHER (B) console mast caps to the console 8.2 mm 20 mm 8.2 mm Qty: 6 using 6 bolts (d), 6 spring washers Qty: 6...
Page 4
ASSEMBLY STEP 4 Open hardware for step 4. HARDWARE fOR STEP 4 : Connect the console cables, discard the twist tie and slide the console cables into the BOLT (F) SPRING WASHER (G) ARC WASHER (H) 12 mm 6.2 mm 6.2 mm center bar.
Need help?
Do you have a question about the 7.1AT and is the answer not in the manual?
Questions and answers