Do you have a question about the 2.5AT and is the answer not in the manual?
Questions and answers
Steven Hoskins
February 17, 2025
How to lube belt
2 comments:
Mr. Anderson
February 17, 2025
The AFG Sport 2.5AT TM658F 2 Ply Unlubricated PVC Treadmill Belt requires lubrication before use. It is recommended to use Euroglide silicone lubricant. Each belt comes with 100ml of this lubricant, supplied free of charge. Apply the lubricant according to the treadmill manufacturer's guidelines to ensure proper function and minimize wear.
This answer is automatically generated
Tom
July 13, 2025
@Mr. Anderson You did not answer the question. How do you lubricate the belt.
Eric Fleck
January 24, 2025
Where do I put the lubricant?
1 comments:
Mr. Anderson
February 10, 2025
The AFG Sport 2.5AT TM658F treadmill belt has a lubricant-infused underside fabric, making it low friction and maintenance-free. No additional lubricant is required.
Page 1
TREADMILL OWNER’S MANUAL Read the TREADMILL GUIDE before using this OWNER’S MANUAL.
Page 3
Before proceeding, find your treadmill’ s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is next to the serial number. ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW: SERIAL NUMBER: AFG SPORT 2.5AT TREADMILL MODEL NAME:...
Page 4
TOUCH PAD PANEL AND DISPLAY WINDOWS SPEAKERS WATER BOTTLE HOLDER SAFETY KEY PLACEMENT GRIP PULSE HANDRAILS SUPPORT BAR ON/OFF SWITCH CONSOLE MAST FOOT LOCK LATCH (UNDERNEATH DECK) CIRCUIT BREAKER MOTOR COVER POWER CORD SIDE RAIL TRANSPORT WHEEL ROLLER END CAP RUNNING BELT / RUNNING DECK REAR ROLLER ADJUSTMENT BOLTS...
PRE ASSEMBLY TOOLS INCLUDED: F 6 mm T-Wrench UNPACKING F 5 mm L-Wrench F 4 mm T-Wrench Place the treadmill carton on a level flat surface. It is recommended that you place a F 4 mm L-Wrench protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side.
ASSEMBLY STEP 1 Open HARDWARE BAG 1. HARDWARE BAG 1 CONTENTS : Cut the yellow banding and get console mast out SOCKET BOLT 10 mm Attach the LEFT SOCKET to the LEFT Qty: 8 CONSOLE MAST using 4 SOCKET BOLTS. Attach the RIGHT SOCKET to the RIGHT CONSOLE MAST using 4 SOCKET BOLTS.
Page 7
ASSEMBLY STEP 2 Lift the RUNNING DECK upward until the HARDWARE BAG 2 CONTENTS : FOOT LATCH locks. Remove all contents from underneath the running deck. BOLT (A) SPRING WASHER (B) FLAT WASHER (C) 20 mm 15 mm 15 mm Open HARDWARE BAG 2.
Page 8
ASSEMBLY STEP 3 Open HARDWARE BAG 3. HARDWARE BAG 3 CONTENTS : Pull LEAD WIRE through RIGHT CONSOLE BOLT (A) SPRING WASHER (B) FLAT WASHER (C) MAST. After pulling the lead wire through the 20 mm 15 mm 15 mm mast, the top of the CONSOLE CABLE should Qty: 4 Qty: 4...
Page 9
ASSEMBLY STEP 4 Disengage the DECK LOCK LATCH with your HARDWARE BAG 4 CONTENTS : foot to lower the RUNNING DECK. BOLT (D) SPRING WASHER (B) FLAT WASHER (C) 15 mm 15 mm 15 mm Open HARDWARE BAG 4. Qty: 6 Qty: 6 Qty: 6 Gently place the CONSOLE on top of the...
Page 10
ASSEMBLY STEP 5 Open HARDWARE BAG 5. HARDWARE BAG 3 CONTENTS : Align SUPPORT BAR with holes in CONSOLE BOLT (H) MASTS. 15 mm Qty: 4 Insert BOLTS (H) into all 4 holes of the SUPPORT BAR. NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
TREADMILL OPERATION This section explains how to use your treadmill’ s console and programming. The BASIC OPERATION section in the TREADMILL GUIDE has instructions for the following: • LOCATION OF THE TREADMILL • USING THE SAFETY KEY • FOLDING THE TREADMILL •...
Page 15
AFG SPORT 2.5AT CONSOLE OPERATION Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) * LED DISPLAY WINDOWS: time, distance, calories, heart rate, speed, incline and workout profiles.
DISPLAY WINDOWS TIME DISTANCE ZEIT ENTFERNUNG TARGETS ZIELE TIME ZEIT DISTANCE ENTFERNUNG CALORIES INCLINE SPEED KALORIEN ENERGY SAVER ENERGIESPARMODUS STEIGUNG GESCHWINDIGKEIT CALORIES KALORIEN HEART RATE HERZFREQUENZ • TIME: Shown as minutes : seconds. View the time • TARGETS: LED lights up next to currently selected target. If remaining or the time elapsed in your workout.
GETTING STARTED NOTE: If no TARGET or WORKOUT is selected, the program will function as a MANUAL program. All changes in speed and 1) Check to make sure no objects are placed on the belt incline will need to be from the user in this setting. that will hinder the movement of the treadmill.
Page 18
TARGET PROFILES TARGET 1 – TIME: Allows user to set a target based on how long they would like to workout. Time targets can range from 15:00 – 99:00. TIME will count down. DISTANCE and CALORIES will count up from zero. TARGET 2 –...
Page 19
3) WEIGHT LOSS – ALL MODELS: Promotes weight loss by increasing and decreasing the speed, while keeping you in your fat burning zone. Segment Warm Up Time 4:00 Mins 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec 30 sec Segments 1–8 repeat...
TO RESET THE CONSOLE Hold STOP key for 3 seconds. COOL DOWN Puts treadmill into cool down mode. Cool down lasts for four minutes and reduces speed and incline to allow your heart to readjust to decreased demand. FINISHING YOUR WORKOUT When your workout is complete, the monitor display will flash “FINISHED”...
EXCLUSIONS AND LIMITATIONS WEIGHT CAPACITY = 300 lbs (136 kilograms) Who IS covered: FRAME • LIFETIME • The original owner and is not transferable. Advanced Fitness Group warrants the frame against defects in workmanship and materials for the lifetime of the original What IS covered: owner, so long as the device remains in the possession of •...
Page 23
SERVICE/RETURNS parts costs, including but not limited to gym membership • In-home service is available within 150 miles of the nearest fees, work time lost, diagnostic visits, maintenance visits or authorized Service Provider (Mileage beyond 150 miles transportation. from an authorized service center is the responsibility of the consumer).
Need help?
Do you have a question about the 2.5AT and is the answer not in the manual?
Questions and answers
How to lube belt
The AFG Sport 2.5AT TM658F 2 Ply Unlubricated PVC Treadmill Belt requires lubrication before use. It is recommended to use Euroglide silicone lubricant. Each belt comes with 100ml of this lubricant, supplied free of charge. Apply the lubricant according to the treadmill manufacturer's guidelines to ensure proper function and minimize wear.
This answer is automatically generated
@Mr. Anderson You did not answer the question. How do you lubricate the belt.
Where do I put the lubricant?
The AFG Sport 2.5AT TM658F treadmill belt has a lubricant-infused underside fabric, making it low friction and maintenance-free. No additional lubricant is required.
This answer is automatically generated