Assembly, Placement, Moving - Vision Fitness R2000 Owner's Manual

ASSEMBLY
If you have elected to assemble this product yourself, for your safety please
read and follow each of the steps in the enclosed assembly instructions. It
is recommended, when possible, that assembly be performed by an
authorized VISION FITNESS retailer. If you have any questions regarding
any part or function of your Bike, contact your retailer.
MOVING
Your VISION FITNESS Bike has a
pair of transport wheels built into
the front legs. To move your semi-
recumbent Bike, firmly grasp the
rear foot assembly, carefully lift
and roll on the transport wheels.
CAUTION:
Our Bikes are well-built and heavy, weighing up to 140 lbs.! Use
care and additional help if necessary.
PLACEMENT IN YOUR HOME
It is important that you place your Bike in a comfortable and inviting room.
Your Bike is designed to use minimal floor space. Many people will place
their Bike facing the TV or a picture window. If at all possible, avoid
putting your Bike in an unfinished basement. To make exercise a desirable
daily activity for you, the Bike should be in an attractive setting.
LEVELING
The Bike should be level for
optimum use. If your Bike wobbles
when you have placed it where
you intend to use it, raise or lower
one or both of the adjustable
6
levelers located on the bottom of
the rear foot support. Once you
have leveled the Bike, lock the
levelers in place by tightening the
wing nuts against the rear foot
support.