Moving And Leveling - Vision Fitness ES80 Owner's Manual

ES80_2013 OM English 052213'.qxd 2013/5/22 7:23 PM Page 14
MOVING THE ES80
Make sure the quick release levers for the handlebar are tight. Stand in
front of the bike, grasping the end of the handlebars. Place one foot on
the bikes front support foot to stabilize the bike and begin tilting the bike
toward you. The transport wheels should now be in contact with the
ground and can easily roll in any direction. Be careful when moving the
bike to prevent a sudden impact that could harm the bike or its
surroundings.
LEVELING THE ES80
The ES80 should operate on a
level surface with no lateral
movement. There are height
adjuster caps located on the
bottom side of the front foot and
rear foot. Turn these caps
clockwise or counter-clockwise
14
until the bike is stable.