Vision Fitness E4000 Assembly Manual
Vision Fitness E4000 Assembly Manual

Vision Fitness E4000 Assembly Manual

Dual-action upright fitness cycle
Hide thumbs Also See for E4000:

Advertisement

A s s e m b l y
G u i d e
E 4 0 0 0
D U A L - A C T I O N U P R I G H T F I T N E S S C Y C L E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E4000 and is the answer not in the manual?

Questions and answers

Randal Marlin
March 30, 2025

How do I replace the main chain (powered by foot pedals)? How do I access the main chain?

1 comments:
Mr. Anderson
March 31, 2025

To access and replace the main chain on a Vision Fitness E4000, follow these steps:

1. Use a 15mm pedal wrench to disassemble the pedals.
2. Remove the outer covers carefully to expose the internal components.
3. Locate and access the chain drive inside the unit.
4. Detach the chain from the crank and rear mechanism.
5. Replace the chain with a compatible new one.
6. Reattach all removed parts in reverse order, ensuring all bolts and screws are tightened securely.

Make sure the unit is unplugged and stable before starting.

This answer is automatically generated

Randal Marlin
March 30, 2025

main chain replacement

1 comments:
Randal Marlin
March 30, 2025

@Randal Marlin

Thomas Tardif
February 19, 2025

What size is the pedal spindle? 1/2 or 9/16?

1 comments:
Mr. Anderson
May 14, 2025

The pedal spindle size for the Vision Fitness E4000 is 15mm, as it requires a 15mm pedal wrench for disassembly. This typically corresponds to a 9/16-inch pedal spindle.

This answer is automatically generated

Subscribe to Our Youtube Channel

Summary of Contents for Vision Fitness E4000

  • Page 1 A s s e m b l y G u i d e E 4 0 0 0 D U A L - A C T I O N U P R I G H T F I T N E S S C Y C L E...
  • Page 2: Table Of Contents

    E 4 0 0 0 dual-action fitness cycle To avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order. Before proceeding though, find your new Fitness Cycle’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records.
  • Page 3: Step

    TOOLS & PARTS INCLUDED Pedal Wrench Allen Wrench Screwdriver L-Shaped Wrench PARTS BOX Front Axle, Qty.: 1 Closed Wrench Front Transport Wheels, Qty: 2 Arm Rail Covers, Qty: 2 Water Bottle & Bracket, Qty: 1 Owner’s Guide, Qty: 1 Assembly Guide, Qty: 1 Warranty Card, Qty: 1...
  • Page 4 HARDWARE INCLUDED ORANGE BAG BLUE BAG M8 x 19L Bolt Quantity: 4 M17 Wavy Washer Quantity: 2 PINK BAG M8 Nylock Nut Quantity: 4 M8 x 41L Bolt Quantity: 2 M5 x 12L Screw M8 x 30 Washer Quantity: 1 Quantity: 2...
  • Page 5 ORANGE BAG STEP • Slide the rear foot into place and secure the four bolts (M8 x 19L) with the 5 Allen wrench. STEP...
  • Page 6 BLUE BAG STEP • Loosen the Set Screw in the Arm Axle with the 4 L-shaped Wrench. • Slide the Front Arm Axle into the STEP plastic sleeve of the front foot. Slide a Wavy Washer onto each end of the axle.
  • Page 7 PINK BAG STEP • Slide the upper cover onto the console mast. • Attach the included string to the Sensor Wire and pull the Sensor Wire up through the console mast. Slide the tension control wire up through the console mast. •...
  • Page 8 15 Pedal wrench. 621-D East Lake Street • P.O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www.visionfitness.com  2001 Vision Fitness. All Rights Reserved. 5.01 Part #Z40CB29-AG18.07PRD AG18.07PRD REV1...

Table of Contents