Vision Fitness E3200 Assembly Manual
Upright fitness cycles
Hide thumbs
Also See for E3200:
- Owner's manual (72 pages) ,
- Service manual (20 pages) ,
- Assembly manual (8 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Vision Fitness E3200
Summary of Contents for Vision Fitness E3200
- Page 1 A s s e m b l y G u i d e E3200 E3200HRT UPRIGHT FITNESS CYCLES...
- Page 2 A s s e m b l y G u i d e E3200 E3200HRT UPRIGHT FITNESS CYCLES To avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order. Before proceeding, find your new Fitness Cycle’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
- Page 3 TOOLS & PARTS INCLUDED Screwdriver Allen Wrench Pedal Wrench Wrench PARTS BOX Water Bottle & Bracket, Qty: 1 Heart Rate Chest Strap, Qty: 1 (E3200HRT only) Power Supply, Qty: 1 Pedals, Qty: 2 Seat Post Knob, Qty: 1 Owner’s Guide, Qty: 1 L-Shaped Wrench Assembly Guide, Qty: 1 Warranty Card, Qty: 1...
-
Page 4: Hardware Included
HARDWARE INCLUDED ORANGE BAG M8 Lock Washer M8 x 20L Screw Quantity: 4 Quantity: 2 M8 x 65L Screw Quantity: 2 PINK BAG M8 x 15L Screw Quantity: 7 M8 x 20L Screw Quantity: 2 M8 Lock Washer Quantity: 8... - Page 5 ORANGE BAG STEP • Slide the rear foot into place and secure with two screws (M8x20L) and two lock washers (M8) to the outside holes. Secure with screws (M8x65L) and two lock washers (M8) to the inside holes. Tighten with the 5 Allen wrench.
- Page 6 Wrench. • Remove the four mounting screws from the back of the console. Connect the wire harness to the console. E3200 Attach the console to the console mast Only using the four mounting screws. • Mount the water bottle bracket to the console mast with the included screws.
- Page 7 SEAT STEP • Slide the seat post cover onto the seat post. • Slide the seat post into the frame and lower the seat post cover into place. • Screw the adjustment knob through the seat post cover and into place on the frame.
- Page 8 Tighten with the 15 Pedal wrench. STEP 500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www.visionfitness.com 2002 Vision Fitness. All Rights Reserved. 6.02 Part #Z32CB25-AG1814PRD AG18.14PRD REV1...