Connecting Wires To Terminals - Kenwood KDC-W6027 Instruction Manual

Connecting Wires to Terminals

To External Display/
Steering remote
KENWOOD disc changer input
To connect the Disc changer,
consult your Disc changer
manual.
Fuse (10A)
Battery wire (Yellow)
Ignition wire (Red)
A –7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Rear left output (White)/
Subwoofer left output (White)
Rear right output (Red)/
Subwoofer right output (Red)
Wiring harness
(Accessory1)
See Next page.
8 6 4 2
7 5 3 1
8 6 4 2
7 5 3 1
Antenna Conversion Adaptor
(ISO–JASO) (Accessory3)
FM/AM antenna
input
TEL mute wire (Brown)
TEL MUTE
If no connections are made, do
not let the wire come out from
the tab.
P.CONT
ANT.CONT
Power control/ Motor
antenna control wire
(Blue/White)
Front right output (Red)
Front left output (White)
Antenna Cord (ISO)
Connect to the terminal that
is grounded when either the
telephone rings or during
conversation.
To connect the KENWOOD
navigation system, consult
your navigation manual.
Connect either to the power
control terminal when using the
optional power amplifier, or to
the antenna control terminal in
the vehicle.
English
29
|