Touch Sensor Tone; Manual Clock Adjustment - Kenwood KDC-W6027 Instruction Manual

Cd receiver
Hide thumbs Also See for KDC-W6027:
Table of Contents

Advertisement

your "Car Audio Passport" in this package.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
3
Enter Security Code mode
Press the [4] or [¢] button for at least 1
second.
When "ENTER" is displayed, "CODE" is displayed.
4
Select the digits to enter
Press the [4] or [¢] button.
5
Select the Security Code numbers
Press the [FM] or [AM] button.
6
Repeat steps 4 and 5, and complete the
Security Code.
7
Confirm the Security Code
Press the [¢] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is
displayed.
8
Do the step 4 through 7 step operation, and
reenter the security code.
"APPROVED" is displayed.
The Security Code function activates.
• If you enter a Code different from your Security Code,
you have to start over from step 4.
Press the Reset button and when it's removed
from the battery power source
1
Turn the power ON.
2
Do the step 4 through 7 step operation, and
reenter the security code.
"APPROVED" is displayed.
The unit can be used.
• If an incorrect code is input, "WAITING" is displayed,
and the input prohibited time shown below is
generated.
After the input prohibited time lapses, "CODE" is
displayed, and input can be done.
Number of times the
incorrect code was input
1
2
3
4

Touch Sensor Tone

Setting the operation check sound (beep sound)
ON/OFF.
Display
Setting
"Beep ON"
Beep is heard.
"Beep OFF"
Beep canceled.

Manual Clock Adjustment

• This adjustment can be done when the 'Synchronize
Clock' (page 24) is set as OFF.
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1
second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.
Input prohibited time
5 minutes
1 hour
24 hours
23
|
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-wv6027

Table of Contents