Text/Title Scroll - Kenwood KDC-W6027 Instruction Manual

2
Enter name set mode
Press the [NAME.S] button for at least 2
seconds.
"NAME SET" is displayed.
3
Move the cursor to the enter character
position
Press the [4] or [¢] button.
4
Select the character type
Press the [38] button.
Each time the button is pressed the character
typed switches as shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5
Select the characters
Press the [FM] or [AM] button.
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
• Media that you can attach names to
- Internal CD player: 30 discs.
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• The name of a CD can be changed by the same
operation you used to name it.

Text/Title Scroll

Scrolling the displayed CD text, MP3/WMA text,
or MD title.
Press the [SCRL] button for at least 1 second.
21
|
English