Contrast Adjustment; Dimmer; Switching Preout; News Bulletin With Timeout Setting - Kenwood KDC-W6027 Instruction Manual

Cd receiver
Hide thumbs Also See for KDC-W6027:
Table of Contents

Advertisement

Contrast Adjustment

Adjusting the display contrast.
Display and Setting
"Contrast 0"
"Contrast 5" (Original setting)
"Contrast 10"

Dimmer

Dimming this unit's display automatically when
the vehicle light switch is turned ON.
Display
Setting
"Dimmer ON"
The display dims.
"Dimmer OFF"
The display doesn't dim.
In Standby mode

Switching preout

Switching the preout between the rear and
subwoofer. (In subwoofer it outputs without
effect from the fader control.)
Display
Setting
"SWPRE Rear"
Rear preout.
"SWPRE Sub-W"
Subwoofer preout.

News Bulletin with Timeout Setting

It switches automatically when a news bulletin
starts even if the radio isn't being listened to. Also,
the time interval when interrupt is prohibited can
be set.
Display and Setting
"NEWS OFF"
"NEWS 00MIN"
"NEWS 90MIN"
When "NEWS 00MIN" — "NEWS 90MIN" is set, the
News Bulletin Interrupt function is ON.
When it's ON, the "NEWS " indicator is ON.
When the news bulletin starts, "NEWS " is
displayed, and it switches to the news bulletin.
• If you choose the "20MIN" setting, further news
bulletins will not be received for 20 minutes once the
first news bulletin is received.
• The news bulletin volume is the same level that was
set for 'Traffic Information' (page 15).
• This function is only available if the desired station
sends PTY-code for news bulletin or belongs to
'Enhanced Other Network'-Network sending PTY-code
for news bulletin.
• When the News Bulletin Interrupt function is ON, it
switches to an FM station.
In Tuner mode

Local Seek

Only stations whose reception is good are
searched for in auto seek tuning.
Display
Setting
"Local.S OFF"
The local seek function is OFF.
"Local.S ON"
The local seek function is ON.
In Tuner mode

Tuning Mode

Sets the tuning mode.
Tuning mode
Display
Auto seek
"Auto 1"
Preset station seek
"Auto 2"
Manual
"Manual"
In Tuner mode

Auto Memory Entry

For the operation method refer to 'Auto Memory
Entry' (page 14).
Operation
Automatic search for a station.
Search in order of the stations
in the Preset memory.
Normal manual tuning control.
25
|
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-wv6027

Table of Contents