Getting Started - Uniden BW2101 Owner's Manual

Getting Started

Step 1. Connection & Installation
Camera Connection
2
DC IN 5V/1A
LCD Monitor Connection
2
1
1
1. Connect the power cable to the
camera's DC IN jack and then plug
the power adaptor to a 240VAC wall
outlet.
2. Slide the power switch down once to
turn ON the camera.
NOTE! The built-in Lithium battery
charges automatically when the power
adaptor is connected. Charge the
battery to full capacity before using the
monitor in portable mode. The battery
is at full capacity when the green
(battery indicator) turns off.
NOTE! Only use the 5V/1A power
adaptor provided in the package.
1. Connect the power cable to the
monitor's DC IN jack and then plug
the power adaptor to a 240VAC wall
outlet.
2. Press the power button to turn ON
the monitor.
NOTE! The built-in Lithium battery
charges automatically when the power
adaptor is connected. Charge the
battery to full capacity before using the
monitor in portable mode.
NOTE! In portable mode, charge the
battery when the battery indicator lights
up red.
NOTE! Only use the 5V/1A power
adaptor provided in the package.
6