Related Manuals for Uniden BW120
Summary of Contents for Uniden BW120
- Page 1 BW120 Baby Audio Monitoring System For more exciting new products please visit our website: Australia: www.uniden.com.au...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: This unit is NOT WATERPROOF. - Page 3 Do not use the cable to pull the AC adaptor plug out of • the socket. Disconnect the AC adaptor plug from the mains when the • device is not in use. The device and the AC adaptor should not come into •...
-
Page 4: Table Of Contents
CONTENTS WhAT’S IN ThE BOx? ............5 GETTING STARTED ............6 Baby Unit...................... 6 Parent Unit....................7 INSTALLATION ..............8 Baby Unit......................8 Parent Unit...................... 9 TROUBLEShOOTING ............10 SPECIFICATIONS ..............12 WARRANTY ...............13... -
Page 5: What's In The Box
WhAT’S IN ThE BOX? BW120 Baby Unit BW120 Parent Unit Not Pictured: • AC Adaptors (x2) • NiMH Rechargeable Batteries for the Parent Unit (x2) • Owner’s Manual If any item is missing or damaged, contact your place of •... -
Page 6: Getting Started
GETTING STARTED Baby Unit Power LED - Lights up to indicate the unit has been powered on. Power ON/OFF button - Press and hold to turn on/off the unit. Microphone - Receives sounds for the area near the Baby Unit, and transmits the sound to the Parent Unit. Power Jack (rear) - Connect to the AC adaptor. -
Page 7: Parent Unit
Parent Unit 1 Sound level light display - Lights up to indicate the sound intensity. 2 Power LED - Lights up to indicate the unit has been powered on. 3 Volume Up/Volume Down button - You can adjust the volume in 5 levels on the unit by pressing the buttons. 4 Power ON/OFF button - Press and hold to turn on/off the unit. -
Page 8: Installation
INSTALLATION Baby Unit The Baby Unit powers on with the AC adaptor. 1. Insert the AC adaptor power plug into the Baby Unit’s DC socket (at the back of the unit). 2. Connect the other end into a 240 volt AC (standard indoor) power outlet. -
Page 9: Parent Unit
Parent Unit Points to note when installing the Parent Unit: The Parent Unit is designed in such a way that it can be • operated only with batteries inserted. The battery must be charged for at least 16 hours • before the unit can be first used independently of the AC adaptor. -
Page 10: Troubleshooting
TROUBLEShOOTING Problems Possible Solutions Power LED does not Check to ensure that: light up after switch- • the AC adaptor is properly plugged in. • the batteries are full. Check if the rechargeable battery needs charging or is damaged (Parent Unit). - Page 11 The signal is weak, • If another technical device such the connection keeps as a microwave is in the area breaking up or there between the Parent and Baby is interference. Units, remove the device or switch it off. • Check whether other factors (such as trees etc) are in the path of the two devices, and change the position of the devices until the...
-
Page 12: Specifications
SPECIfICATIONS Radio Frequency DECT technology Frequency 1.8GHz frequency No. of Channels 120 digital channels Unobstructed 300m Effective Range Power Supply Baby Unit: (6 V DC/450 mA) Parent Unit: NiMH battery (2 x 1.2 V/400 mAh) and supplied AC Adaptor (6 V DC/450 mA) Operating 5ºC to 45ºC Temperature... -
Page 13: Warranty
498. Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the BW120 (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below. - Page 14 Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden. Please refer to the Uniden website for address details. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.
- Page 16 ©2016 Uniden Australia Pty Ltd Printed in PRC...