Camera Setup - Turn Camera(S) On/Off / Camera Scan Period; Main Menu - Uniden BW2101 Owner's Manual

Advanced Operation (cont'd)
II. Get to Know the Main Menu (cont'd)
Camera Setup - Turn Camera(s) On/Off
Camera Setup - Camera Scan Period
1. Use /
you want to turn off.
2. Press OK to change ON/OFF status.
NOTE!
Make sure available cameras
are set to ON for SCAN or Quad mode.
1. Use /
interval from OFF / 5 sec / 15 sec
/ Quad.
2. Press OK to confirm the settings.
NOTE!
To leave Quad display, simply
press directional keys to enter single
channel view.
= CAM1;
= CAM3;
NOTE!
When system enters into
power save mode from Quad, press
any key to resume monitor view.
12
to select the camera
to change Scan Time
= CAM2;
= CAM4;