Advertisement
In
stallation of the Maxim II
Placement of the Maxim II mixer/amplifier is usually
dictated by: what other equipment will be integrated with
the sound system, and how it will be mounted. Location of
the electrical AC power o
s
pe
aker and sensor cables. Cushion pads are installed for
fre
e stance installation.
Installing the Maxim II under or above a shelf
• Use the SM – 700 shelf mount kit
• Mount the two tabs on th
using
threaded
• The tabs can be mounted oriented inward or
outward
• With the tabs mounted, hold the amplifier in
position and mark the mounting holes
• Drill mounting holes in support structure in
accordance wit
• With tabs oriented outward, install the Maxim II
onto support
• With tabs oriented inward, remove the tabs and
install them on
• Insert
mounted tabs
Installing the Maxim II in an electronic equipment
• Use the RM – 400 rack mount kit.
• Mount the tabs on the side of the amplifier
• Install the Maxim II in the rack at desired location
Installation
the
threaded
screws provided.
h mounting hardware being used.
the support.
and
install
Procedure
utlet and the routing of the
e sides of the amplifier
mounting
the
amplifier
holes
and
the
between
th
rack
e
Advertisement
