Advertisement
• With the ceiling tile removed, measure the distance
to the next speaker and cut a speaker cable
appropriate length.
• Strip the speaker cable ends approximately ¾"
• String the cut speaker c
to next speaker location.
• Reinstall the ceiling tile with the tile bridge located
above the speaker hole.
• With a pointed tool, remove the speaker grille.
•
Pull the speaker cable back through the speaker
hole and connect speaker cable to speaker
o Caution: Observe polarity, co
(+) terminal and other wire to the "C" terminal
• Remove the speaker grille using
• Insert speaker into speak
• Hold in place and tighten the th
with a #2 phillips screw driver.
• Reinstall speaker grille.
• Remove any soil and fingerpr
• Repeat above steps with the following additions:
• Measure distance from speaker to amplifier
• Cut and strip speaker
• Advance the wire from speaker to amplifier
• Twist t
he two speaker cables together (Red to Red)
and Black to Black.
• Connect the Red pair to the (+) terminal and Black
to (C).
able from speaker location
nnect Red wire to
a paper clip
er hole
ree quick clamps
ints
wire.
Advertisement
