Advertisement
BRC-101 and BRC-202 can recharge the batteries in the Pendant
transmitter (IRT-89) or Handheld transmitter (IRH-30). Insert either
tr
ansmitter into the fitted stand receptacle. Charging will commence
automatica
lly. Two "AA" batteries can also be inserted into th
tr
ay for charging.
USE RECHARGEABLE NiMH BATTERIES ONLY
Charging Batte
• Plug power supply into an AC outlet and insert plug into
charger.
• Insert transmitter, either Pendant or Handheld into receptacle,
the "STAND" Red and Green L
charger is operational.
• "STAND"
being charged. (3 – 4 Hours)
• "STAND" LED will change to "
charged.
Charging Batteries in Front Tray:
• Insert two "AA" batteries in tray (observe polarity)
• Center "B
batteries being charged. (3 – 4 Hours)
• "BATTERY" LED w
charged.
Discharging Batteries:
• Discharge batteries to rejuvenate and extend service life.
• Remove batteries from transmitter and insert in front tray.
• Push "DISCHARGE" button.
• "Amber" LED will light, indicating batteries being discharged.
• Upon
exhaustion and recharging, center "BATTERY" LED will
glow "Green", completing the cycle.
• Recommend recycling every 30 – 60 days. Will increase service
life.
ries in "Stand" Receptacle:
LED will start Blinking
ATTERY" LED will start Blinking Red, indicating
ill change to "Green" when batteries are fully
ED's will blink once, indicating
Red,
indicating batteries are
Green" when batteries are fully
e front
Advertisement
