Testing The Installation; Testing The Installation Using The Sunvts Software; To Test The Installation - Sun Microsystems Sun StorEdge Installation Manual

Sbus dual fibre channel host adapter

Hide thumbs Also See for Sun StorEdge:

Table of Contents

C H A P T E R

Testing the Installation

This chapter describes how to test the Sun StorEdge™ SBus dual Fibre Channel host

adapter in a system.

Testing the Installation Using the

SunVTS Software

The SunVTS™ diagnostic program exercises your system to verify the functionality,

reliability, and configuration of your host adapter. You will need to install both the

32- and 64-bit versions of the SunVTS software. The SunVTS 4.3 User's Guide

contains instructions on installing SunVTS. The Solaris 8 4/01 release requires the

SunVTS 4.3 software or later. See "Related Documentation" on page xvii for more

information on the Sun VTS software.

1. On a system running the common desktop environment (CDE), type the following

commands to invoke SunVTS:

# cd /opt/SUNWvts/bin

# ./sunvts

2. From the SunVTS menus, select the following:

a. Select devices None and select intervention.

Table of Contents

Table of Contents

Storedge