Installing The Hardware; Tools And Equipment Needed; Installing The Host Adapter - Sun Microsystems Sun StorEdge Installation Manual

2
C H A P T E R

Installing the Hardware

The minimum hardware requirement for the Sun StorEdge SBus Dual Fibre Channel
Host Adapter is an SBus-based system. This chapter describes how to install the
adapter in a system and contains the following topics:
"Tools and Equipment Needed" on page 5
"Installing the Host Adapter" on page 5

Tools and Equipment Needed

You need the following items to install the adapter:
A No. 2 Phillips screwdriver
An antistatic wrist strap
A padded antistatic mat
You might also need fiber optic cables. You can order them in the following lengths:
2-meter, part number X973A
15-meter, part number X978A

Installing the Host Adapter

This section contains procedures to install the adapter in Sun Enterprise E3x00 -
E6x00 servers. To install the adapter in a Sun Enterprise 10000 server, contact your
Sun Enterprise Service representative or qualified service provider. This section
contains the following topics:
5