To Specify Slices On The New Boot Disk - Sun Microsystems Sun StorEdge Installation Manual

2. Type the number of the disk to be formatted to display the FORMAT menu.
The following screen example uses disk 2.
Specify disk (enter its number): 2
selecting c7t16d0:
[disk formatted]
FORMAT MENU:
format>
3. Make a note of the device name of the disk.
The device name of the disk in the previous screen example is c7t16d0.

To Specify Slices on the New Boot Disk

After you change to the new boot disk, specify one slice on the new boot disk for
every slice on the temporary boot disk. The following examples specify the root slice
0 on the new boot disk to match slice 0 on the temporary boot disk.
B-14 Sun StorEdge SBus Dual Fibre Channel Host Adapter Installation Guide • October 2002
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit