Testing The Installation; Sunvts; Testing Procedure - Sun Microsystems Sun StorEdge Installation Manual

Testing the Installation

SunVTS

Refer to the SunVTS documents in TABLE 1-4.
TABLE 1-4
Application
Diagnostic Testing
SunVTS is a diagnostic program that exercises your system to verify the
functionality, reliability, and configuration of your host adapter. You will need to
install both the 32- and 64-bit versions of SunVTS. In addition, you will need the
SunVTS qlc test package—SUNWvtsqc—installed.
Once you have the SUNWvtsqc package installed, you may run the qlctest under
SunVTS.

Testing Procedure

1. To invoke SunVTS locally on a system running CDE, type the following as root:
# cd /opt/SUNWvts/bin
# ./sunvts
2. From the SunVTS menus select the following:
a. Select devices None and select intervention.
b. Select mode Functional test.
c. Select HostAdapters qlcx where x is the qlc # of the qlc port you want to run
this test against.
12 Sun StorEdge PCI Dual Fibre Channel Host Adapter Installation Guide • January 2007
Sun VTS Documents
Title
SunVTS 3.4 User's Guide
SunVTS 3.4 Test Reference
Sun VTS 4.0 User's Guide
Sun VTS 4.0 Test Reference Manual
Part Number
806-2884
806-2885
806-2057
806-2058