Patching A Network Installation Image For The Solaris 8 4/01, Solaris 8 7/01, Or Solaris 8 10/01 Release; To Patch A Network Installation Image - Sun Microsystems Sun StorEdge Installation Manual

The system reboots and then the CD is ejected. Web Start is displayed.
7. Load any dditional Solaris software from the CDs as required.
Refer to the Solaris 8 4/01, Solaris 8 7/01, or Solaris 8 10/01 documentation for
further information on optional software.
8. When the last CD is installed, click Reboot Now.
The system boots using the Solaris release that you installed.
Patching a Network Installation Image
for the Solaris 8 4/01, Solaris 8 7/01, or
Solaris 8 10/01 Release
Note – If the installation server is already set up with an image of the Solaris 8 4/01,
Solaris 8 7/01, or Solaris 8 10/01 release, skip to Step 7.

To Patch a Network Installation Image

1. Become superuser.
2. Insert the Solaris 8 Software 1 of 2 CD in a CD-ROM drive used by the
installation server.
3. Change to the Tools directory:
# cd /cdrom/cdrom0/s0/Solaris_8/Tools
4. Create the install image:
.
# /setup_install_server
5. Return to the home directory:
# cd /
image-directory
Chapter 3 Installing Solaris OE From the Installation CD 19