To Update The Vfstab File - Sun Microsystems Sun StorEdge Installation Manual

# ufsdump 0f - /dev/rdsk/c0t1d0s0 | ( cd /mnt; ufsrestore rf -)
DUMP: Writing 32 Kilobyte records
DUMP: Date of this level 0 dump: Tue 19 Feb 2002 02:44:35 PM PST
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/rdsk/c7t16d0s0 (hba2-81:/) to standard
output.
DUMP: Mapping (Pass I) [regular files]
DUMP: Mapping (Pass II) [directories]
DUMP: Estimated 1818082 blocks (887.74MB).
DUMP: Dumping (Pass III) [directories]
DUMP: Dumping (Pass IV) [regular files]
Warning: ./lost+found: File exists
DUMP: 88.77% done, finished in 0:01
DUMP: 1818046 blocks (887.72MB) on 1 volume at 1363 KB/sec
DUMP: DUMP IS DONE
#

To Update the vfstab File

After you copy the boot block and root files, update the vfstab file.
1. Change directories to /mnt/etc and open the vfstab(4) file for editing.
The following example shows the file systems defined.
# cd /mnt/etc
# vi vfstab
...
/dev/dsk/c0t1d0s1
/dev/dsk/c0t1d0s0
/dev/dsk/c0t1d0s7
- - swap
/dev/rdsk/c0t1d0s0
/dev/rdsk/c0t1d0s7
Appendix B Booting From the Network Adapter
- no -
/ ufs 1
/home ufs 2
no -
yes -
B-21