To Confirm The Installation - Sun Microsystems Sun StorEdge Installation Manual

To Confirm the Installation

1. Power on your peripherals and then your system.
Note – If your system starts to reboot, interrupt the reboot process by pressing the
Stop-A keys.
The system should now be at the ok prompt.
2. Detect devices from the OpenBoot PROM.
Detecting OpenBoot PROM Level Devices
CODE EXAMPLE 2-1
ok probe-fcal-all
/pci@13,2000/pci@2/SUNW,qlc@5
/pci@13,2000/pci@2/SUNW,qlc@4
/pci@12,2000/pci@2/SUNW,qlc@5
/pci@12,2000/pci@2/SUNW,qlc@4
LiD HA LUN --- Port WWN ---
1 1 0 50020f23000069d8
1 1 1 50020f23000069d8
/sbus@3,0/SUNW,qlc@0,30400
/sbus@3,0/SUNW,qlc@0,30000
/sbus@2,0/SUNW,qlc@2,30400
/sbus@2,0/SUNW,qlc@2,30000
LiD HA LUN --- Port WWN ---
2 2 0 50020f230000652c
2 2 1 50020f230000652c
/sbus@2,0/SUNW,qlc@1,30400
/sbus@2,0/SUNW,qlc@1,30000
/sbus@2,0/SUNW,socal@d,10000/sf@1,0
loop 1 is OFFLINE
loop 1 is OFFLINE
----- Disk description -----
SUN T300
SUN T300
----- Disk description -----
SUN T300
SUN T300
Chapter 2 Installing the Hardware
0117
0117
0117
0117
9