Installing The Host Adapter - Sun Microsystems Sun StorEdge Installation Manual

Caution – If you need to remove a system board for installation, place the board on
a padded antistatic mat to prevent damage.

Installing the Host Adapter

1. Pull the two dust covers out of the 1x9 optical transceiver (OT) connectors
(FIGURE 1-3).
Sun StorEdge PCI Dual Fibre Channel Host Adapter Dust Covers
FIGURE 1-3
2. Install the host adapter in the PCI slot you have chosen.
Installation details vary for each system. Refer to your system documentation for
specific instructions.
Chapter 1 Installation 7