Assigning Send And Receive Msns To Internal Participants - Gigaset CX590 ISDN User Manual

Creating ISDN settings
In idle status:
v ¤ Ï ¤ Telephony ¤ ISDN Wizard
§Yes§
Press the display key to launch
the ISDN wizard.
§OK§
Press the display key to confirm
the info text.
A list of MSNs already set up is then dis-
played.
§Change§
Press the display key to set up
additional MSNs or modify the
settings for an existing MSN.
Setting up a new MSN
q
Select the MSN - Name line of
an empty MSN entry.
~
Enter the MSN name (max. 16
characters) (optional).
s
Jump to the corresponding
MSN - Number line.
~
Enter the MSN (max. 20 digits;
without area code = prefix).
¤ Repeat this process for other MSNs, if
required.
¤ Press the display key
changes.
Once the ISDN wizard is finished, the con-
nection wizard starts automatically. This
enables you to assign send and receive con-
nections to the internal parties.
Assigning send and receive
MSNs to internal participants
If you have configured multiple MSNs for
your telephone system, you can do the fol-
lowing for each internal participant
u Assign a send MSN to each internal party
or allow them to select the connection for
each external call (line selection).
u Assign one or more receive MSNs. Only
calls received via the assigned MSNs are
signalled on the device.
64
§Save§
to save the
Assigning a send MSN
Prerequisite: multiple numbers have been
configured.
v ¤ Ï ¤ Telephony ¤ Send Connection
A list of internal participants is displayed.
q
Select the internal participant to
be assigned a new send MSN
and press the
r
Select at each call or select an
MSN as the send connection.
§Save
Press the display key to save the
changes.
If you select Select at each call, the internal
party can select which MSN is used to estab-
lish a connection every time they make a
call.
Assigning receive MSNs
Prerequisite: multiple connections have
been configured.
v ¤ Ï ¤ Telephony
¤ Receive Connections
A list of internal participants is displayed.
q
Select the internal participants
that should be assigned new
receive MSNs and press the dis-
play key
A list containing all receive MSNs is opened.
r
Select Yes or No.
s
Switch to the next receive con-
nection.
¤ Repeat these two steps for each MSN.
¤ Press the display key
changes.
§OK§
display key.
§OK§
.
§Save§
to save the