Displaying The Electronic Label Data For The Device - HP 870 Installation Manual

CPLD Ver
Table 3 Command output (on the switching engine)
Field
SubSNo
PortNum
PCBVer
FPGAVer
CPLDVer
BootRomVer
AddrLM
Type
State

Displaying the electronic label data for the device

An electronic label is a profile of a device. It contains the permanent configuration, including the serial
number, manufacturing date, MAC address, and vendor name.
Use the display device manuinfo command to display the electronic label data for the device.
On the controller engine:
•
<HP>display device manuinfo
Subslot 0
DEVICE_NAME
DEVICE_SERIAL_NUMBER
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
On the switching engine:
•
<HP>display device manuinfo
Slot 1:
DEVICE_NAME
DEVICE_SERIAL_NUMBER : CN11G5N111
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
Table 4 Command output
Field
DEVICE_NAME
DEVICE_SERIAL_NUMBER
MAC_ADDRESS
: 005 004
Description
Slot number of the switching engine.
Maximum number of interfaces that the switching engine supports.
PCB version of the switching engine.
FPGA version of the switching engine.
CPLD version of the switching engine.
Boot ROM version of the switching engine.
Address learning mode.
Switching engine model.
Switching engine status.
: 870 Unified Wired-WLAN JG723A
: CN11G5N111
: C4CA-D9DE-4FAF
: 2013-05-08
: HP
: 870 Unified Wired-WLAN JG723A
: C4CA-D9DE-4FAE
: 2013-05-08
: HP
Description
Device model.
Serial number of the device.
MAC address of the device.
34