HP 870 Installation Manual page 16

Unified wired-wlan appliance

Hide thumbs Also See for 870:

Table of Contents

Figure 10 Installing rear mounting brackets

Supporting the bottom of the device with one hand, push the device horizontally into the rack.

Attach the front mounting brackets on the device to the front rack posts with screws and cage nuts,

as shown in

Figure

Figure 11 Installing the device to the rack

NOTE:

After pushing the device into the rack, make sure the upper edges of the rear mounting brackets attached

to the rack make close contact with the weight-bearing screws on the device.

11.

Table of Contents