Installing the device
WARNING!
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open the
chassis, contact HP Support for permission. Otherwise, HP will not be liable for any consequence caused
thereby.
Confirming installation preparations
Before you install the device, verify that you have read "Preparing for installation" carefully and the
installation site meets all the requirements.
Installation flow
Figure 3 Installation flow
Mount the device to a
workbench
Start
Install the device
Ground the device
Connect interface
cables
Install the power
supply
Connect the power
cord
Power on the device
No
Operating
correctly?
Yes
End
8
Install the device to a
19-inch rack
Troubleshoot the
device
Power off the device