Displaying Operational Statistics For The Device - HP 870 Installation Manual

FPGA1 Logic Version is 307
FPGA2 Logic Version is 307
Basic Bootrom Version is 1.05
Extend Bootrom Version is 1.05
[Slot 0]870 LSW Hardware Version is NA
[Slot 1]870 Hardware Version is Ver.A
• On the switching engine:
<HP>display version
HP Comware Platform Software
Comware Software, Version 5.20.105, ESS 2607P09
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
HP 870 LSW uptime is 0 week, 0 day, 0 hour, 2 minutes
HP 870 LSW with 2 Processors
1024M
16M
Config Register points to Nor Flash
Hardware Version is Ver.A
CPLDA Version is 005, CPLDB Version is 004
BootRom Version is 1.05
[SubSlot 0] 12GE+12SFP+4SFP Plus Hardware Version is Ver.A

Displaying operational statistics for the device

When you perform routine maintenance or the system fails, you might need to display the operational
information of each feature module to locate failures. Typically, you need to run the display commands
individually. However, you can use the display diagnostic-information command in any view to display
or save the operational statistics of multiple feature modules of the device. This command displays the
output of the display clock, display version, display device, and display current-configuration
commands.
Save the operational statistics for each feature module of the device:
•
<HP>display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[cfa0:/default.diag]:
The file already exists, overwrite it? [Y/N]:y
Diagnostic information is outputting to cfa0:/default.diag.
Please wait...
Save successfully.
Execute the more default.diag command in user view, and then press the Page Up and Page Down
keys to view the contents of the file default.diag.
• Display the operational statistics for each feature module of the device. (Details not shown.)
<HP>display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================================
===============running CPU usage information===============
=================================================================
===== Current CPU usage info =====
bytes DDR3
bytes Nor Flash Memory
32