Installing The Device By Using Front Mounting Brackets And Slide Rails - HP 870 Installation Manual

Figure 13 Installing the device to the rack
Installing the device by using front mounting brackets and slide
rails
The slide rails are optional components that need to be separately ordered if needed. The slide rails in
this example are for illustration only.
To install the device by using front mounting brackets and slide rails:
1. Wear the ESD-preventive wrist strap and verify that the rack is well grounded and sturdy enough.
2. Use the screws packed with the front mounting brackets to attach the front mounting brackets to the
device, as shown in
3. Install the slide rails to the rack. See
Figure 14 Installing slide rails
Figure 8.
Figure 14
14
for reference.